Question: Are Zircon Stud Finders Good?

How do you find a stud without a detector?

If you don’t find signs of a stud 16 inches from the first one, measure 24 inches from the first stud and look again there.

Drive a small nail into the wall where you believe you have found a stud.

If the nail doesn’t hit wood under the plaster or drywall, pull it out and insert a wire hanger into the hole..

How do Zircon stud finders work?

Zircon stud finders are designed to be as effortless as possible. Place the stud finder flat against the wall, press and hold the power button, and wait for 1-2 seconds. The tool automatically calibrates to the wall’s surface.

Do you need a stud finder for a brick wall?

Standard electronic stud finders can easily detect these drywall studs, but a home with a brick facade requires a stud finder with a deep-scanning option; these facades can be up to 1 inch thick. Using a higher-end deep-scanning device will allow you to find studs through the facade with accuracy and speed.

Do stud finder apps really work?

Stud finder applications for the smartphone can detect studs behind the wall and other metal objects like earrings and lost keys. Depending on the quality of the app and its capabilities, they can work just as well as a stud finder device, although they often lack the other features that these tools come with.

Can I use my iPhone as a stud finder?

The iPhone beeps when its magnetometer, in the upper right of the phone, is near metal. Stud Find is an iPhone application that uses the device’s built-in magnetometer to find metal studs, screws, nails and anything metallic in a wall.

Why do stud finders not work?

1) Check Your Battery. If your stud finder worked previously, but no longer seems to work, about 9 times out of 10, the problem is a weak battery. You may swear that the battery is still good, but it’s not. … Compared to garage doors and many other devices, stud finders require a very strong battery.

What if I can’t find a stud in the wall?

If you cannot locate a stud, try tapping a small nail into the wall board near an existing fixture. If it meets resistance behind the wall-board then you have a stud. Wall studs should be spaced in regular intervals (usually 16″ on center in the US) so you can simply measure over to your mount area to locate them.

What is the most accurate stud finder?

To cover all of your potential needs, here are the best stud finders.Best Overall: Franklin Sensors ProSensor 710 Precision Stud Finder. Excellent. … Best Budget: Zircon StudSensor e50 Electronic Wall Scanner. Excellent. … Best Magnetic: CH Hanson 03040 Magnetic Stud Finder. Very Good.

Do you drill into the stud?

Are You Supposed to drill into a Stud? In most situations drilling into the stud is the best option, but if you’re trying to hang a small lightweight picture or decoration it may not be necessary, you maybe be able to get by with just drilling a hole into the drywall and using a drywall anchor.

How do you find a stud in an old house?

Electrical boxes for outlets and light switches are supposed to be attached to studs. Though there may be an occasional free floating box in an old home, you have an excellent chance of finding a stud on one side of the box. To see which side the stud is on, take the switch plate cover off and take a peak inside.

Which Zircon stud finder is the best?

Here are the best stud finders:Best stud finder overall: Franklin Sensors ProSensor 710.Best low-cost stud finder: CH Hanson Stud 4 Sure Magnetic Stud Finder.Best durable stud finder: Ryobi LED Whole Stud Detector.Best high-sensitivity stud finder: Zircon MultiScanner 740.More items…•

Are stud finders reliable?

Hanson 03040 Magnetic Stud Finder. After 30 hours of research and testing against five other magnetic stud finders, we found the C.H. Hanson to be reliable, durable, and accurate, and we also like it because it doesn’t need batteries or any kind of calibration.

What happens if a nail hits a wire?

If the nail makes contact with the hot conductor, the nail becomes live, and you can be electrocuted by touching it. You must therefore immediately turn off the breaker controlling the circuit. If you don’t know which breaker that is, turn off the main breaker.

How far apart are wall studs?

16 inchesThe general spacing for wall studs is 16 inches on center, but they can be 24 inches.

What kind of stud finder do I need?

Get an ultrasound model, of whatever brand. If you are looking to locate wood studs and or electrical wires behind standard sheetrock type walls, I’d recommend the Zircon with deep stud/electrical alert/ metal detection. I have both a Stanley and a Zircon and find that the Zircon is the most dependable.

What is the best stud finder app?

Top 20 Stud Finder Apps For Android And iOSStud Detector. Stud Detector is one of the best stud finder app for android users which allows you to easily ind metal framing studs. … Stud Find. … Real metal detector with sound. … Wall Stud Finder. … Stud Detector by Guylyhey. … Metal Detector. … Metal Detector. … Toolbox.More items…•

Do stud finders work on ceilings?

Stud finders measure density to find beams, so they don’t work on popcorn ceilings. If your nail penetrates the ceiling and doesn’t hit a solid surface, check again an inch away; if you don’t find one there either, measure 24 inches in from the wall and check there instead.

How deep do stud finders work?

about 3/4-inchMagnetic stud finders work to a depth of about 3/4-inch, which is sufficient most of the time for finding studs behind standard 1/2-inch or 5/8-inch drywall. When you locate a nail or screw, you’ve located a stud.

Do stud finders detect wires?

Using an electronic stud finder, you can detect live wires behind the walls or through the studs. An electronic stud finder is a tool that will let you find studs, beams, joists, or wires. … Your stud finder lets off small beeping noises as you run it along your wall.

What is the best stud finder app for Iphone?

Stud finderStud finderRatingCheck on AmazonStud Find3.0Check on App Store .Metal Detector and Magnetometer4.3Check on App Store .Metal Detector4.1Check on App Store .Toolbox Smart Meter Tools4.5Check on App Store .6 more rows•Jul 6, 2019

Can a stud finder find floor joists?

Use a stud finder to locate the joists. A stud finder is an electronic gizmo used to determine the location of wall studs or floor joists. They’re available at hardware stores and home centers. Move the stud finder along the floor to determine the possible location of a floor joist at the center point of the squeak.